Feb 13, 2012

Wire Pot Stand

Again, I started with Scott Bryce's design from http://scottbryce.com/yaas_stove.  The legs are made from coat hangers.  I didn't want to try to find the aluminum tubing or 22 shells, so I used some stiff wire I found on the workbench and twisted it around the two coat hanger legs with pliers, and bent feet onto the ends of the wire. Except for the small 1/4" feet, the dimensions are the same as Scott's "Yet Another Pot Stand". I bent them a little smaller to fit inside my pot, a Backcountry 700ml pot similar to this: http://www.backcountry.com/backcountry-titanium-cookset-1100ml

It's important to maintain the vertical clearance from stove to  pot for optimum heating.

No comments: